English
中文
Français
Deutsch
Italiano
Русский
Español
Português
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
Differentiële druktransmitters van de KDP210-serie
KDP210 Differentiële drukzender met 4-20mA uitgang IP65 bescherming en LCD-scherm
KDP210 Differential Pressure Transmitter Product Overview Measurement Media Air, neutral gases, dry gases, and other gases Range Minimum ±25 Pa / 0-25 PaMaximum 0-10 kPaCommon ranges: ±100 Pa, ±1000 Pa, ±10000 Pa0-0.125～1.5 kPa Output Signal 4-20mA (2/3-wire), 0-5V (3-wire), 0-10V (3-wire), RS485 (Modbus RTU) Power Supply 16-30VAC/DC (3-wire); 18-30VAC/DC (2-wire) Accuracy ±1% F.S Protection Rating IP65/NEMA4 Display LCD backlit display Applications HVAC and Energy Management
KDP210 Differentiële druktransmitter
2 Wire 4-20mA ABB Differential Pressure Transmitter Sensor For Pharmaceutical Clean Rooms Description The differential pressure transmitter is a transmitter that measures the pressure difference between the two ends of the transmitter, and outputs standard signals (such as 4~20mA, 0~5V). Differential pressure transmitters are different from general pressure transmitters in that they have 2 pressure interfaces. Differential pressure transmitters are generally divided into
KDP210Q differentialdruktransmitter
KDP210Q 0-10V LCD display differential pressure transmitter for HVAC Description KDP210Q series differential pressure transmitters are available with and without screen for customers to choose from with high precision, ultra-low & adjustable range, fast response characteristics.The cable connector adopts M16*1.5 to tighten the threaded port, which is not only effective in protecting against water and dust, but also suitable for multi-size cables. Feature Ranges from -25/+25Pa
Vervangbare Greystone-differentiële drukzender met IP65-bescherming
Resplaceable greystone differential pressure transmitter Description Differential Pressure (DP) transmitters measure the difference between two pressures. They use a reference point called the low-side pressure and compare it to the high-side pressure. Ports in the instrument are marked high-side and low-side. The DP level transmitter reading can be either negative or positive depending on whether the low-side or high-side is the larger value. A DP transmitter can be used as
Hand Differentiële Aangepaste de Druksensor van het Kaliberbepalingswater
water differential pressure sensor Description Differential pressure sensor is a device for measuring pressure or differential pressure. It usually consists of two sensitive diaphragms close to each other. When the pressure of the measured medium changes the distance between the two diaphragms slightly, the corresponding electrical signal will be generated on the sensitive diaphragm. This kind of sensor using direct contact to measure pressure is called pressure sensor; The
